Komax 26 – Hot stamp marker
Introduction
The Komax 26 marker utilizes the proven and reliable operating method of hot stamping.
This marker is designed for use on Komax base machines, but has a simple input signal for signal activation
that also allows it to be connected to all common types of automatic wire processing machines.
Key features:
- Very good value for the money
- Minimal conversion times
- Stamping wheels, foils and connection cables are compatible with those of the Komax 24
- Adjustable foil advance
- Key conversion procedures require no tools
- Optional production table for convenient and precise repositioning of marker
- New, economical marking wheels available at a reasonable price
Function
No tools are required for key conversion procedures like changing the wire, the
foil or the text. Stamping foils are in cartridges for easy exchange outside the Komax 26. Only two
wire guides are required to mark wires with outside diameters ranging from 1.3 to 10mm. The specially
developed twist guard reduces wear on the stamping wheels. It is possible to displace the position of
the marker with the whole optional marker table or by the special rod on the table.
Technical data
| Power supply | 230V, 50/60 Hz (115V, 50/60Hz) |
|---|---|
| Compressed air | 5-8 bar; consumption approx. 0,5 l/cycle |
| Stamping temperature | 50-200°C, continuously adjustable |
| Dimensions (WxHxD) | 350x320x500mm |
| Weight | 18kg |
| Wire outside diameters | 1.3 bis 10mm |
| Max. number of symbol wheels | 2x16 |
Accessories/options
- Foilcoilers
- Spacer rings
- Stamping foils
- Wire guide for diameters ranging from 1.3 to 6mm
- Production table Komax 250 with feet
- Production table Komax 250 with roles
- Various marking wheels
- Various wire guides
- Straightening station
- Various connection cables
- Accessory cassettes
